Surface modification of wool fabric with POSS® nanomaterial
journal contribution
posted on 2023-05-03, 12:06authored byCarline Bakker, Arun Ghosh, Surinder Tandon, Steve RanfordSteve Ranford
Wool fabrics, without any surface treatment, can undergo undesirable and irreversible structural changes of wool fiber during washing under heat and mechanical agitation, leading to high shrinkage of wool garments. The traditional method based on polyamide resin can prevent felting and/or shrinkage of wool textiles, but adversely affect the surface hydrophobicity. In the present study, a treatment solution was developed based on TriSilanolIsooctyl POSS® and 3-mercaptopropyl trimethoxysilane, which created wool surface with increased hydrophobicity and highly resistant to shrinkage or felting, as measured after 3×5A wash cycles (equivalent to 24 domestic washes). After the treatment, the wool fabric appeared to be superhydrophobic with a water contact angle of above 150°, compared to the untreated fabric. The treatment has marginal effect on mechanical performance as observed in tensile properties. Scanning electron microscopic images revealed a coating of POSS® on the wool surface. The dyeing of untreated and treated fabrics appeared to be uniform to the naked eye, though spectrophotometric analysis indicated a difference in the extent of dyeing performance. This research showed that POSS®-based treatment is a potentially effective approach for developing shrink-resistant wool textiles with enhanced surface hydrophobicity, in contrast to traditional chlorine/polyamide resin treatment.
Bakker, C., Ghosh, A., Tandon, S., & Ranford, S. (2018). Surface modification of wool fabric with POSS® nanomaterial. Fibers and Polymers, 19(10), 2127–2133. doi:10.1007/s12221-018-1169-2